Flow-Rite

System 1 Open/Closed Livewell Actuator for use with V1 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

System 2 Empty/Automatic Livewell Actuator for use with V2 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

System 4 Fill/Empty/Recirculate Livewell Actuator for use with V4 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

Replacement O-Rings are available for a variety of Flow-Rite parts. Constructed with high quality Viton material. They are compatible with Flow-Rite PSA Aerator Heads and PSN Aerator Heads. They will also fit the 3/4" Qwik-Lok Socket and 1-1/8" Qwik-Lok Socket. Flow-Rite MD-014 Replacement O-Rings...

Part MD-093 contains a #6-32 x 3/4" truss head, black oxide screw from Flow-Rite. Used for mounting of cable actuator RK series. Constructed of durable stainless steel material. The MD-093 truss head screws are sold individually.

Flow-Rite Crimp Clamps are used for securing a hose to Qwik-Lok sockets. The MD-110 Crimping Tool is required for installing the crimp clamp. The diameter of the clamp is 3/4". Built with quality materials for long service life.

This product is a replacement decal for System 1 Open/Closed Livewell Actuators. This actuator system is compatible with V1 series valves. Actuator requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

This product is a replacement decal for System 4 Fill/Empty/Recirculate Livewell Actuators. This actuator system is compatible with V4 series valves. Actuator requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

Is the rear decal of your actuator knob so damaged or worn you cannot read it? Replace it with Flow-Rite's Rear Replacement Actuator Decal. Features bright, white lettering on a sleek, black background.

The Power-Jet aerator is designed to be mounted well below the surface of the livewell for direct introduction of fresh oxygenated water. It can be used with systems 2, 3, or 4, or a livewell mounted aerator pump only. (It is not for use...

The PowerStream Aerator features a venturi air intake at the top of the discharge head to maximize the oxygen entering the livewell water. The longer mixing tube directs this mixture directly to the depths of the livewell and is then discharged horizontally well below...

The PowerStream Aerator features a venturi air intake at the top of the discharge head to maximize the oxygen entering the livewell water. The longer mixing tube directs this mixture directly to the depths of the livewell and is then discharged horizontally well below...

This Qwik-Lok Adaptor features a 3/4" diameter male end by a 1-1/4" diameter female end. The overall dimensions are 2-1/4" length by 1-1/4" width. Used exclusively for the outlet of Rule Tournament Series pumps to adapt to Qwik-Lok.

With today?ÇÖs high performance hull designs, jack plates and larger outboards, putting a drain plug in or taking one out can be a very unpleasant task. The Flow-Rite Remote Drain Plug makes that job as simple as turning a switch. No more lying on...

With today?ÇÖs high performance hull designs, jack plates and larger outboards, putting a drain plug in or taking one out can be a very unpleasant task. The Flow-Rite Remote Drain Plug makes that job as simple as turning a switch. No more lying on...

With today?ÇÖs high performance hull designs, jack plates and larger outboards, putting a drain plug in or taking one out can be a very unpleasant task. The Flow-Rite Remote Drain Plug makes that job as simple as turning a switch. No more lying on...

The V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. A short 60 ° cable throw provides more support, strength, and smoothness than long 90 ° throws used with conventional valves. Features dual seals for positive shut-off in...

The V2 is our reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. By mounting the pump to the valve body, the...

The V2 is our reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. By mounting the pump to the valve body, the...

Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed...