airmar
-
Vendor: Airmar10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use brand-specific connectors.Gemeco has introduced a...
- Regular price
- $34.37
- Regular price
-
$35.00 - Sale price
- $34.37
- Unit price
- per
-
Vendor: Airmar11-Pin Low-Frequency Mix & Match Cable for RaymarineSome CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an...
- Regular price
- $126.35
- Regular price
-
$94.20 - Sale price
- $126.35
- Unit price
- per
-
Vendor: Airmar117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- Regular price
- $33.80
- Regular price
-
$32.10 - Sale price
- $33.80
- Unit price
- per
-
Vendor: Airmar117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with: B117 B150 B744V B744VL B765C SS555
- Regular price
- $44.73
- Regular price
-
$45.00 - Sale price
- $44.73
- Unit price
- per
-
Vendor: Airmar117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- Regular price
- $56.58
- Regular price
-
$53.73 - Sale price
- $56.58
- Unit price
- per
-
Vendor: Airmar117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut. For 2" bronze and stainless steel housings (P617V, B617V, SS617V).Use wrench 117WR-2 or 117WR-3 for...
- Regular price
- $33.80
- Regular price
-
$35.00 - Sale price
- $33.80
- Unit price
- per
-
Vendor: Airmar164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- Regular price
- $44.00
- Regular price
-
$50.00 - Sale price
- $44.00
- Unit price
- per
-
Vendor: Airmar164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with: B164 SS164 SS264
- Regular price
- $56.58
- Regular price
-
$68.00 - Sale price
- $56.58
- Unit price
- per
-
Vendor: AirmarAirmar Single Arm WrenchModel: 164WR-2Single arm wrench for use with Airmar B164 and B175 series transducers
- Regular price
- $59.56
- Regular price
-
$77.42 - Sale price
- $59.56
- Unit price
- per
-
Vendor: Airmar164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- Regular price
- $70.30
- Regular price
-
$84.00 - Sale price
- $70.30
- Unit price
- per
-
Vendor: Airmar175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with: B164 B175 SS164 SS264...
- Regular price
- $37.71
- Regular price
-
$39.00 - Sale price
- $37.71
- Unit price
- per
-
Vendor: AirmarAirmar Single Arm WrenchModel: 164WR-2Single arm wrench for use with Airmar B164 and B175 series transducers
- Regular price
- $39.69
- Regular price
-
$51.59 - Sale price
- $39.69
- Unit price
- per
-
Vendor: Airmar200WX WeatherStation Instrument - Land-based, Mobile, StandaloneThe WeatherStation 200WX is the best choice for mobile, land-based, weather-monitoring applications. Sensor-rich, durable, rugged, small housing that is IPX6 rated, means the 200WX can be used on moving platforms such as TV news and military vehicles.Knowing the...
- Regular price
- $1,687.90
- Regular price
-
$1,734.00 - Sale price
- $1,687.90
- Unit price
- per
-
Vendor: AirmarTransom paddlewheel and carrier Fits: P37, P52, P55, S61 and ST63 multi-function transducers and speed sensors with detachable paddlewheel assembly
- Regular price
- $23.05
- Regular price
-
$24.75 - Sale price
- $23.05
- Unit price
- per
-
Vendor: AirmarLow/High Frequency - In-Hull Chirp Transducer without ConnectorRely on Airmar's new broadband transducers for your ultimate fishing mission. Whether you're a commercial fisherman, charter captain, or tournament angler, there's a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000') with...
- Regular price
- $4,860.00
- Regular price
-
$4,896.67 - Sale price
- $4,860.00
- Unit price
- per
-
Vendor: Airmar60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- Regular price
- $33.80
- Regular price
-
$35.00 - Sale price
- $33.80
- Unit price
- per
-
Vendor: Airmar60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with: B60 SS60
- Regular price
- $44.73
- Regular price
-
$54.00 - Sale price
- $44.73
- Unit price
- per
-
Vendor: Airmar60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- Regular price
- $56.58
- Regular price
-
$68.00 - Sale price
- $56.58
- Unit price
- per
-
Vendor: Airmar60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with: B60 SS60
- Regular price
- $35.31
- Regular price
-
$35.00 - Sale price
- $35.31
- Unit price
- per
-
Vendor: Airmar75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified...
- Regular price
- $35.31
- Regular price
-
$35.00 - Sale price
- $35.31
- Unit price
- per