traxstech

This plate allows other brand rod holders to be mounted to and used in the Traxstech track system. It is compatible with Scotty, Cabela's, Tite-Loc 2"x2", Down-East S-17, Folbe Deck Mounts, and Luhr-Jensen's Speed Indicator Plate. Includes stainless steel hardware and thumbscrews.

This adapter plate comes with a S-17 Salty Bolt-On Rod Holder already mounted on it and ready for installation in your track. Stainless steel hardware and thumbscrews are included. Signature textured finish.

This bracket will fit in the Alumacraft track system. It allows the Traxstech mounting track to mount on top allowing our Traxstech fishing product to slide in. This bracket is also used to mount to the bottom of any Traxstech rod holder (as long...

Traxstech's Adjustable Arm Mount with Lift & Turn Base offers 360 degrees of rotation every 18 degrees, 6 locking positions up and down in 90 degrees with stainless steel plunger assembly. The base plate of the mount can be used with the thumb screws...

This beverage holder is made to mount on our Traxstech track system and provide extra space to keep your can or bottle safe and secure while out fishing. A single beverage holder that is 4" tall to support your bottle or can. The inside...

This beverage holder is made to mount vertically and provide extra space to keep your can or bottle safe and secure while out fishing. A single beverage holder that is 4" tall to support your bottle or can. The inside diameter is 3". Fits...

Traxstech's C-500-2 Replacement Caps can be used on all tube-type rod holders that have a 2" diameter tube and 1/8" wall. The plastic construction provides excellent protection for your rods. Includes two caps.

Traxstech's CP-06 Adjustable Position Cleat is great for attaching an extra boat fender, dock lines, and as a tie-off for tubes when swimming off the boat or to help position drift bags. The signature textured finish adds durability to the aluminum components, hardens your...

Traxstech's ECMDP-108 Dual Pivot Adjustable Electronics Mount offers an 8" tall overall height with the lift and turn base, 360-degree rotation every 18 degrees, six locking positions up and down in 90 degrees. These two pivots are on the top and bottom of the...

Traxstech's ECMDP-110 Dual Pivot Adjustable Electronics Mount offers a 10" tall overall height with the lift and turn base, 360-degree rotation every 18 degrees, six locking positions up and down in 90 degrees. These two pivots are on the top and bottom of the...

Traxstech's ECMDP-113 Dual Pivot Adjustable Electronics Mount offers a 13" tall overall height with the lift and turn base, 360-degree rotation every 18 degrees, six locking positions up and down in 90 degrees. These two pivots are on the top and bottom of the...

Traxstech's ECMFH-LT-200 Lift and Turn Electronics Mount features Traxstech's signature textured finish that adds durability to the aluminum components, hardens your wear surface, no brite refection, and is easy to clean. Every aluminum part is anodized after our texturing process to provide the highest...

The signature textured finish adds durability to the aluminum components, hardens your wear surface, no brite refection, and is easy to clean. Every aluminum part is anodized after our texturing process to provide the highest quality available. Salt spray tested and proven.

Traxstech's Tall Lift and Turn Single Pivot Adjustable Electronics Mount features a lift and turn base, 360-degree rotation every 18 degrees, six locking positions up and down in 90 degrees. The base plate of the mount can be used with the thumb screws in...

Traxstech's Tall Lift and Turn Single Pivot Adjustable Electronics Mount features a lift and turn base, 360-degree rotation every 18 degrees, six locking positions up and down in 90 degrees. The base plate of the mount can be used with the thumb screws in...

Traxstech's Tall Lift and Turn Single Pivot Adjustable Electronics Mount features a lift and turn base, 360-degree rotation every 18 degrees, six locking positions up and down in 90 degrees. The base plate of the mount can be used with the thumb screws in...

This is an optional 3'' x 4'' subplate (ECMP-4) that is used to mount first to your boat deck and then this standard plate will mount to the bottom of your Traxstech electronic mount and allow easy removal by the four corner screws. Signature...

Do you have a larger Electronics and looking for a larger top plate to support it? Look no farther Traxstech has got you covered with the ECTAP-110 / Electronics Mount Long Top Plate. This plate can upgrade your existing Traxstech Electronic Mounts to support...

One-handed ratchet-ability, smooth lifting! Traxstech's Ratcheting Rod Holder liquid has 17 fish-able positions, two positions past 90 degrees, for the ultimate in diver positioning. Its ratcheting design is fully enclosed with a large release knob for ease of use. All aluminum construction design with...

One-handed ratchet-ability, smooth lifting! Traxstech's Ratcheting Rod Holder liquid has 17 fish-able positions, two positions past 90 degrees, for the ultimate in diver positioning. Its ratcheting design is fully enclosed with a large release knob for ease of use. All aluminum construction design with...